SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2009TAHOE BASE, 4.8 CREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 23 (FIXED & MOVEABLE WINDOW SYSTEMS)VISUAL IDENTIFICATIONWINDOW SYSTEMS CONNECTORSWINDOW SWITCH - RR
2009 Chevrolet Tahoe Base, 4.8 C

Window Switch - RR

2009 Chevrolet Tahoe Base, 4.8 CSECTION Window Switch - RR
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Chevrolet Tahoe, 2007 Chevrolet Suburban, and 2007 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Window Switch - RR Connector End View
GM556473Courtesy of GENERAL MOTORS CORP.
Window Switch - RR Connector Parts Information

Connector Part Information 
  • OEM: 15326924
  • Service: 15306174
  • Description: 8-Way F GT 280 Series (BK)
Terminal Part Information 
  • Pins: A-D
  • Terminal/Tray: 15304711/8
  • Core/Insulation Crimp: E/A
  • Release Tool/Test Probe: 15315247/J-35616-4A (PU)
  • Pins: E-H
  • Terminal/Tray: 15304713/19
  • Core/Insulation Crimp: Pins E, H - 4/4
  • Core/Insulation Crimp: Pins F, G - F/D
  • Release Tool/Test Probe: 15315247/J-35616-4A (PU)
Window Switch - RR Connector Terminal Identification

Pin Wire Color Circuit No. Function
A L-GN 170 Power Window Master Switch Right Rear Up Signal
B BN/WH 230 Instrument Panel Lamp Dimming Control
C PU 171 Power Window Master Switch Right Rear Down Signal
D L-BU/WH 280 Power Window Master Switch Lockout Right Rear Signal
E D-BU 670 Power Window Motor Right Rear Up Control
F BK 1250 Ground
G RD/WH 1340 Battery Positive Voltage
H BN 671 Power Window Motor Right Rear Down Control
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.