SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2009TAHOE BASE, 4.8 CREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 23 (FIXED & MOVEABLE WINDOW SYSTEMS)REPAIR INSTRUCTIONSLIFTGATE WINDOW LATCH REPLACEMENT
2009 Chevrolet Tahoe Base, 4.8 C

Liftgate Window Latch Replacement

2009 Chevrolet Tahoe Base, 4.8 CSECTION Liftgate Window Latch Replacement
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Chevrolet Tahoe, 2007 Chevrolet Suburban, and 2007 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: View Of Liftgate Window Latch Assembly & Screws
GM1684641Courtesy of GENERAL MOTORS CORP.
Liftgate Window Latch Replacement

Callout Component Name
Preliminary Procedure: 
Remove the liftgate trim panel. Refer to Liftgate Trim Panel Replacement .
1 Liftgate Window Latch Screws (Qty: 3)
NOTE: Refer to Fastener Notice .

Tighten:  9 N.m (80 lb in)


Tip:  Reach inside of the liftgate and loosen the screws, removing the latch using the key holes in the liftgate panel.
2 Liftgate Window Latch Assembly
Tip:  Disconnect the electrical connector.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.