Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2009TAHOE BASE, 4.8 CREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 218 (INSTRUMENT PANEL TRIM AND CONSOLE TRIM)REPAIR INSTRUCTIONSFRONT FLOOR CONSOLE ARMREST HINGE REPLACEMENT
2009 Chevrolet Tahoe Base, 4.8 C
Front Floor Console Armrest Hinge Replacement
2009 Chevrolet Tahoe Base, 4.8 CSECTION Front Floor Console Armrest Hinge Replacement
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2010 GMC Yukon XL, 2010 GMC Yukon, 2010 Chevrolet Tahoe, 2010 Chevrolet Suburban, and 2010 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name |
|---|---|
| Preliminary Procedure: Remove the Console Assembly. Refer to Front Floor Console Replacement (Cadillac) or Front Floor Console Replacement (Except Cadillac) . |
|
| 1 | Front Floor Console Armrest Inner Panel Screw (Qty: 8)
CAUTION:
Refer to Fastener Caution
.
Tighten: 2 N.m (18 lb in) |
| 2 | Front Floor Console Armrest Inner Panel |
| 3 | Front Floor Console Armrest to Hinge Screw (Qty: 4) Tighten: 2 N.m (18 lb in) |
| 4 | Front Floor Console Armrest Assembly |
| 5 | Front Floor Console Compartment Assembly Refer to Front Floor Console Compartment Replacement (Except Cadillac) . |
| 6 | Front Floor Console Armrest Hinge to Console Retainer Screw (Qty: 4) Tighten: 2 N.m (18 lb in) |
| 7 | Front Floor Console Armrest Hinge Assembly |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.