Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Circuit/System Description
The Accessory Power Module (APM) controls the energy flowing between the high voltage, 300-volt, direct current (DC) and low voltage, 14-volt, DC to support the vehicles accessories and charge the 12-volt battery. The APM receives a 14-volt enable command from the Hybrid Powertrain Control Module (HPCM) over the high speed hybrid GMLAN communication circuit. APM functions will run only when the APM Enable is active on the high speed hybrid GMLAN communication circuit.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.