Special Tools

2009 Chevrolet Tahoe Base, 4.8 CSECTION Special Tools
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Illustration Tool Number/ Description
GM2037431Courtesy of GENERAL MOTORS CORP.
CH 49009
Inner Tie Rod Wrench
GM322143Courtesy of GENERAL MOTORS CORP.
J 4245
Internal Snap Ring Pliers
GM322157Courtesy of GENERAL MOTORS CORP.
J 6219
Pitman Shaft Seal Installer
GM322173Courtesy of GENERAL MOTORS CORP.
J 6278
Bearing Remover and Installer
GM2014Courtesy of GENERAL MOTORS CORP.
J 8001
Dial Indicator Set
GM82243Courtesy of GENERAL MOTORS CORP.
J 22610
Keystone Clamp Pliers
GM133Courtesy of GENERAL MOTORS CORP.
J 24319-B
Steering Linkage and Tie Rod Puller
GM676Courtesy of GENERAL MOTORS CORP.
J 25033-C
Pulley Installer
GM675Courtesy of GENERAL MOTORS CORP.
J 25034-C
Pulley Remover
GM643842Courtesy of GENERAL MOTORS CORP.
J 39570
Chassis Ear
GM750633Courtesy of GENERAL MOTORS CORP.
J 44586
Power Steering Gear Oil Seal Remover/Installer
GM686560Courtesy of GENERAL MOTORS CORP.
J 44721
Power Steering Analyzer
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.