SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2009TAHOE BASE, 4.8 CREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 136 (ANTI-LOCK BRAKE SYSTEM - HYBRID)REPAIR INSTRUCTIONSANTILOCK BRAKE SYSTEM AUTOMATED BLEED PROCEDURENOTES
2009 Chevrolet Tahoe Base, 4.8 C

Antilock Brake System Automated Bleed Procedure: Notes

2009 Chevrolet Tahoe Base, 4.8 CSECTION Notes
WARNING: This page is about a different car, the 2008 GMC Yukon and 2008 Chevrolet Tahoe. However, it is still accessible from the selected car via links, so may be relevant.

Special Tools

  • J 29532  Diaphragm Pressure Bleeder, or J-29532-A  Brake Pressure Bleeder, or equivalent. See Special Tools .
  • J 35589-A  Brake Bleeder Adapter, or equivalent. See Special Tools .
CAUTION: At times during this brake bleed procedure brake fluid will be under higher pressures than during typical brake bleed procedures. Ensure the bleeder hose attached to the bleeder valve is securely maintained in position whenever the bleeder valve is opened. Failure to maintain the bleeder hose securely to the valve when opened, may allow the hose to blow off and brake fluid to spray out of the bleeder valve, possibly resulting in personal injury. 
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.