Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2009SILVERADO 2500 2WD V8-6.6L DSL TURBOREPAIR AND DIAGNOSISMAINTENANCESERVICE INTERVALSNORMAL SERVICE142500 MI OR 228000 KM
2009 Chevrolet Silverado 2500 2WD V8-6.6L DSL Turbo
142500 MI or 228000 KM
2009 Chevrolet Silverado 2500 2WD V8-6.6L DSL TurboSECTION 142500 MI or 228000 KM
Lubricate
Steering and Suspension
Lubricate the front suspension, ball joints, steering linkage, transmission shift linkage, transfer case shift linkage, parking brake cable guides, and brake front axle. Ball joints should not be lubricated unless their temperature is -12 degrees C (10 degrees F) or higher or they could be damaged.
Inspect
Washer Fluid
Check windshield washer fluid level and add fluid as needed.
Vehicle
Visually check for any leaks or damage. A fluid loss in any vehicle system could indicate a problem. Have the system inspected and repaired and the fluid level checked. Add fluid if needed.
Coolant
Check engine coolant fluid level and add fluid as needed.
Brakes and Traction Control
Inspect Brake System. Visually inspect brake lines and hoses for proper hook-up, binding, leaks, cracks, chafing, etc. Inspect disc brake pads for wear and rotors for surface condition. Inspect other brake parts, including calipers, parking brake, etc.
Replace
Oil Filter, Engine
Engine Oil
Change engine oil and filter, or every 12 months whichever occurs first. Reset the oil life system.
Rotate
Tires
Rotate tires and check inflation pressures and wear.
Steering and Suspension
Lubricate the front suspension, ball joints, steering linkage, transmission shift linkage, transfer case shift linkage, parking brake cable guides, and brake front axle. Ball joints should not be lubricated unless their temperature is -12 degrees C (10 degrees F) or higher or they could be damaged.
Inspect
Washer Fluid
Check windshield washer fluid level and add fluid as needed.
Vehicle
Visually check for any leaks or damage. A fluid loss in any vehicle system could indicate a problem. Have the system inspected and repaired and the fluid level checked. Add fluid if needed.
Coolant
Check engine coolant fluid level and add fluid as needed.
Brakes and Traction Control
Inspect Brake System. Visually inspect brake lines and hoses for proper hook-up, binding, leaks, cracks, chafing, etc. Inspect disc brake pads for wear and rotors for surface condition. Inspect other brake parts, including calipers, parking brake, etc.
Replace
Oil Filter, Engine
Engine Oil
Change engine oil and filter, or every 12 months whichever occurs first. Reset the oil life system.
Rotate
Tires
Rotate tires and check inflation pressures and wear.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.