Quick Lookups: Fluids

2009 Chevrolet HHR LT, 2.4 V, StandardSECTION Fluids
FLUID CAPACITIES
Fluid Type Application Standard Metric Fluid Spec Note S/H
Air Cond Compressor Oil w/CVC Compressor 5.00 OZS. 0.14 L PAG 46 S
Air Cond Compressor Oil w/PVX16 Compressor 4.00 OZS. 0.11 L PAG 46 S
Air Cond Refrigerant 0.90 LBS. 0.4 KG R-134a S
Automatic Transmission Fluid Drain and Refill 7.00 QTS. 6.62 L Automatic Transmission Fluid DEXRON VI All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck the fluid level after filling. S
Automatic Transmission Fluid Dry 12.90 QTS. 12.2 L Automatic Transmission Fluid DEXRON VI All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck the fluid level after filling. S
Automatic Transmission Fluid Overhaul 9.50 QTS. 8.99 L Automatic Transmission Fluid DEXRON VI All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck the fluid level after filling. S
Brake Fluid N/A N/A DOT 3 Brake Fluid S
Engine Coolant 2.4L Eng,Standard Trans 8.70 QTS. 8.23 L 50/50 mixture of DEX-COOL and clean, drinkable water All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck the fluid level after filling. S
Engine Oil 2.4L Eng w/Filter 5.00 QTS. 4.73 L API - SAE 5W-30 Use oil that meets GM Standard GM6094M. For areas of extreme cold, where temperatures fall below -20Deg.F (-29Deg.C), it is recommended a SAE 5W-30 synthetic oil or a SAE 10W-30 oil. Both will provide easier cold starting and better protection for your engine at extremely low temperatures. S
Fuel Tank 16.20 GALS. 61.32 L S
Manual Transmission Fluid Trans Mfr CD M86 Drain and Refill 1.70 QTS. 1.6 L DEXRON VI GM Part No. 88861003. S
Manual Transmission Fluid Trans Mfr CD M86 Dry 1.90 QTS. 1.79 L DEXRON VI GM Part No. 88861003. S
Power Steering Fluid N/A N/A GM Power Steering Fluid GM Part No. 89021184. S
Windshield Washer Fluid N/A N/A Optikleen Windshield Washer Fluid Follow the Manufacturer's Instructions for the mixture ratio. S
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.