SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2009HHR LT, 2.4 V, STANDARDREPAIR AND DIAGNOSIS (SINGLE PAGE)QUICK LOOKUPSELECTRICAL COMPONENT LOCATIONSWIRING SYSTEMS AND POWER MANAGEMENT - ELECTRICAL CENTER ID VIEWS & COMPONENT & SPLICE PACK CONNECTOR END VIEWSCOMPONENT CONNECTOR END VIEWSAUDIO AMPLIFIER X2 (UQ3)
2009 Chevrolet HHR LT, 2.4 V, Standard

Audio Amplifier X2 (UQ3)

2009 Chevrolet HHR LT, 2.4 V, StandardSECTION Audio Amplifier X2 (UQ3)
Fig 1: Audio Amplifier X2 (UQ3) Connector End View
GM888604Courtesy of GENERAL MOTORS CORP.
Audio Amplifier X2 (UQ3)

Pin Wire Circuit Function
1 0.35 YE 116 Left Rear Speaker Output (-)
2 0.35 BN 199 Left Rear Speaker Output (+)
3 0.35 D-BU 46 Right Rear Speaker Output (+)
4 0.35 L-BU 115 Right Rear Speaker Output (-)
5-8 - - Not Used
9 0.35 D-GN 117 Right Front Speaker Output (-)
10 0.35 L-GN 200 Right Front Speaker Output (+)
11 0.35 TN 201 Left Front Speaker Output (+)
12 0.35 GY 118 Left Front Speaker Output (-)
13-16 - - Not Used
Connector Part Information 
  • OEM: 7283-5534-60
  • Service: 88952777
  • Description: 16-Way M 1.5 Series Sealed (GN)
Terminal Part Information 
  • Pins: 2
  • Terminal/Tray: 7116-4100-08/9
  • Core/Insulation Crimp: E/C
  • Release Tool/Test Probe: 12094430/J-35616-2A (GY)
  • Pins: 1, 3, 4, 9-12
  • Terminal/Tray: 7116-4101-08/9
  • Core/Insulation Crimp: Pins 1, 3, 4, 11, 12 - E/A
  • Core/Insulation Crimp: Pins 9, 10 - C/A
  • Release Tool/Test Probe: 12094430/J-35616-2A (GY)
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.