Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

SYS.OK|MANUAL.DB● LIVE

HOMESERVICE MANUALSCHEVROLET2009CHEVY EXPRESS G2500, VAN CARGO, 4.8 CREPAIR AND DIAGNOSISBODY & FRAMESEATSPOWER SEAT SYSTEMREPAIR INSTRUCTIONSPOWER SEAT SWITCH REPLACEMENTINSTALLATION PROCEDURE

2009 Chevrolet Chevy Express G2500, Van Cargo, 4.8 C

Installation Procedure

2009 Chevrolet Chevy Express G2500, Van Cargo, 4.8 CSECTION Installation Procedure

Fig 1: Seat Cushion, Adjuster, Riser, Adjuster Switch & Motor Electrical Harness

Courtesy of GENERAL MOTORS CORP.

Install the power seat adjuster switch (5) to the vehicle.
Connect the electrical connector to the power seat adjuster switch.
Install the power seat adjuster switch to the seat cushion (1).

CAUTION: Refer to Fastener Caution .

Install the screws in order to retain the power seat adjuster switch to the seat cushion and tighten to 2 N.m (18 lb in).

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready Tools Free Quote Check Quote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.
• Brakes feel soft, pull hard to one side, or make grinding noises.
• The engine overheats, stalls repeatedly, or misfires under load.
• You are missing required tools, torque specs, or safe lifting equipment.
• You are not confident in the next step or safety outcome.