SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2008HHR LT, 2.4 P, AUTOMATICREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 662 (ENGINE COOLING SYSTEM)SPECIFICATIONSFASTENER TIGHTENING SPECIFICATIONS
2008 Chevrolet HHR LT, 2.4 P, Automatic

Fastener Tightening Specifications

2008 Chevrolet HHR LT, 2.4 P, AutomaticSECTION Fastener Tightening Specifications
WARNING: This page is about a different car, the 2011 Chevrolet HHR. However, it is still accessible from the selected car via links, so may be relevant.
Fastener Tightening Specifications

Application Specification
Metric English
Coolant Heater Bolt 10 N.m 89 lb in
Coolant Reservoir Bolt 9 N.m 80 lb in
Condenser Bolt 20 N.m 15 lb ft
Engine Coolant Temperature (ECT) Sensor 20 N.m 15 lb ft
Exhaust Heat Shield Stud 22 N.m 16 lb ft
Radiator Bracket Upper Bolt 9 N.m 80 lb in
Radiator Support Lower Bolt-L61, LE5 22 N.m 16 lb ft
Radiator Support Lower Bolt-LNF 34 N.m 25 lb ft
Thermostat Housing Bolt 10 N.m 89 lb in
Thermostat Housing Cover Bolt 10 N.m 89 lb in
Water Pump Access Plate Bolt 10 N.m 89 lb in
Water Pump Bolt 25 N.m 18 lb ft
Water Pump Sprocket Bolt 10 N.m 89 lb in
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.