Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Circuit/System Description
The liftgate can be released by pressing the liftgate touchpad located in the handle above the license plate. All doors must be unlocked, the transaxle must be in park or a vehicle with a manual transaxle, the vehicle must be stationary for the liftgate to release.
Pressing the liftgate release switch closes a contact providing a ground for the liftgate release switch signal circuit. The body control module (BCM) will detect the voltage drop and command voltage to be supplied to the liftgate release relay control circuit thus energizing the L/GATE RELSE relay which provides voltage to the release actuator releasing the liftgate.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.