SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2008HHR LT, 2.4 P, AUTOMATICREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 564 (WIRING SYSTEMS AND POWER MANAGEMENT - COMPONENT CONNECTOR END VIEWS - TRANSFER CASE ENCODER THROUGH YAW SENSOR)COMPONENT CONNECTOR END VIEWSTRANSFER CASE NEUTRAL SWITCH (NP1) CONNECTOR END VIEW
2008 Chevrolet HHR LT, 2.4 P, Automatic

Transfer Case Neutral Switch (NP1) Connector End View

2008 Chevrolet HHR LT, 2.4 P, AutomaticSECTION Transfer Case Neutral Switch (NP1) Connector End View
WARNING: This page is about a different car, the 2011 GMC Canyon and 2011 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Transfer Case Neutral Switch (NP1) Connector End View
GM1334528Courtesy of GENERAL MOTORS CORP.
Transfer Case Neutral Switch (NP1)

Pin Wire Circuit Function
1 0.35 GY 2281 Neutral Switch Signal
2 0.35 BK 550 Ground
Connector Part Information 
  • Harness: Engine
  • OEM: 10763359
  • Service: 88987929
  • Description: 2-Way F SWP 070 Series Sealed (BN)
Terminal Part Information 
  • Terminated Lead: Pending
  • Release Tool: J-38125-12A
  • Diagnostic Test Probe: J-35616-33 (YE)
  • Terminal/Tray: 7116-1471/12
  • Core/Insulation Crimp: E/1
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.