SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2008HHR LT, 2.4 P, AUTOMATICREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 331 (INTERIOR TRIM SYSTEM AND PANELING)REPAIR INSTRUCTIONSCARGO PARTITION TRACK SLIDE REPLACEMENT
2008 Chevrolet HHR LT, 2.4 P, Automatic

Cargo Partition Track Slide Replacement

2008 Chevrolet HHR LT, 2.4 P, AutomaticSECTION Cargo Partition Track Slide Replacement
WARNING: This page is about a different car, the 2010 Chevrolet HHR. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Cargo Partition Track Slide
GM2177511Courtesy of GENERAL MOTORS CORP.
Callout Component Name
Preliminary Procedure: 
Remove the cargo stowage tray assembly. Refer to Cargo Stowage Tray Replacement .
1 Cargo Partition Track Slide Assembly
Procedure: 
Invert the tray assembly to access the slide assembly fasteners.
2 Cargo Partition Track Slide Fastener (Qty: 4)
CAUTION: Refer to Fastener Caution .

Tighten:  16 N.m (12 lb ft)
3 Cargo Partition Track Slide Fastener (Qty: 4)

Tighten:  16 N.m (12 lb ft)
4 Passenger Side Glide Assembly
5 Cargo Partition Track Slide Fastener (Qty: 4)

Tighten:  16 N.m (12 lb ft)
6 Driver Side Glide Assembly
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.