SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2008HHR LT, 2.4 P, AUTOMATICREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 244 (LIGHTING SYSTEM)SPECIFICATIONSFASTENER TIGHTENING SPECIFICATIONS
2008 Chevrolet HHR LT, 2.4 P, Automatic

Fastener Tightening Specifications

2008 Chevrolet HHR LT, 2.4 P, AutomaticSECTION Fastener Tightening Specifications
WARNING: This page is about a different car, the 2010 Pontiac G5 and 2010 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.
Application Specification
Metric English
Backup Lamp Nut 4.5 N.m 40 lb in
Backup Lamp Screw 1.5 N.m 13 lb in
Brake Pedal Position Sensor Bolt 2 N.m 18 lb in
Front Fog Lamp Screw 2 N.m 18 lb in
Front Headlamp Assembly Bolt 10 N.m 89 lb in
Front Headlamp Bracket Bolt 9 N.m 80 lb in
High Mounted Stop Lamp Nut 4.5 N.m 40 lb in
Instrument Panel Cluster Trim Plate Bolt 10 N.m 89 lb in
Instrument Panel Cluster Trim Plate Screw 2.2 N.m 19 lb in
License Plate Lamp Screw 2.5 N.m 22 lb in
Rear Side Marker Lamp Screw 2.5 N.m 22 lb in
Tail Lamp Nut-Chevrolet Export 4.5 N.m 40 lb in
Tail Lamp Screw-Chevrolet Export, G5 1.5 N.m 13 lb in
Tail Lamp Nut-Chevrolet Coupe 10 N.m 89 lb in
Tail/Turn Signal Lamp Nut 5 N.m 44 lb in
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.