Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2008HHR LT, 2.4 P, AUTOMATICREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 224 (HANDSFREELINK SYSTEM)DTC TROUBLESHOOTING INDEX
2008 Chevrolet HHR LT, 2.4 P, Automatic
DTC Troubleshooting Index
2008 Chevrolet HHR LT, 2.4 P, AutomaticSECTION DTC Troubleshooting Index
WARNING: This page is about a different car, the 2011 Honda Insight and 2010 Honda Insight. However, it is still accessible from the selected car via links, so may be relevant.
DTC TROUBLESHOOTING INDEX
| DTC | Description | DTC type | Page | ||||
|---|---|---|---|---|---|---|---|
| B1750(1) | Communication circuit error (BUS off) | Loss of communication | DTC Troubleshooting (see DTC B1750: COMMUNICATION CIRCUIT ERROR (BUS-OFF) ) | ||||
| B1775 | Microphone Input Short to Battery or Open or Microphone Failure | Signal error | DTC Troubleshooting (see ) | ||||
| B1776 | Microphone Input Short to Ground or Microphone Failure | Signal error | DTC Troubleshooting (see ) | ||||
| B1779 | HandsFreeLink Steering Wheel Open or Short to Battery or Switch Failure | Signal error | DTC Troubleshooting (see ) | ||||
| B1780 | HandsFreeLink Steering Wheel Short to Ground or Switch Failure | Signal error | DTC Troubleshooting (see ) | ||||
| B1792 | HandsFreeLink Control Module Error | Internal error | DTC Troubleshooting (see ) | ||||
| U1280(2) | Communication bus line error (BUS-OFF) | Loss of Communication | DTC Troubleshooting (see DTC U1280: COMMUNICATION BUS LINE ERROR (BUS-OFF) ('11 MODEL) ) | ||||
|
|||||||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.