SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2008HHR LT, 2.4 P, AUTOMATICREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 216 (AUDIO SYSTEM)SYSTEM DESCRIPTIONAUDIO UNIT CONNECTOR FOR INPUTS AND OUTPUTSAUDIO UNIT CONNECTOR B (20P)
2008 Chevrolet HHR LT, 2.4 P, Automatic

Audio Unit Connector B (20P)

2008 Chevrolet HHR LT, 2.4 P, AutomaticSECTION Audio Unit Connector B (20P)
WARNING: This page is about a different car, the 2011 Honda Insight and 2010 Honda Insight. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Audio Unit B (20P) Connector Terminals
G00501844Courtesy of AMERICAN HONDA MOTOR CO., INC.
TERMINAL NAME REFERENCE CHART

Cavity Wire Color Terminal Name Connect to
B3 BRN AUX S-GND Auxiliary jack assembly
B4 GRY(1) AUX SH-GND Shield for terminals No. 3, No. 13, and No. 14
B5 WHT AUX GND Auxiliary jack assembly
B13 YEL AUX LCH Auxiliary jack assembly
B14 ORN AUX RCH Auxiliary jack assembly
B15 PUR AUX DET Auxiliary jack assembly
(1) The shielded wires have a heat-shrink tube insulating the outside of the wire. The color of the insulating tube, typically black or dark gray, may not match the color of the wire shown on the circiut digram.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.