Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2008EXPRESS 2500 V8-6.6L DSL TURBOREPAIR AND DIAGNOSISBODY AND FRAMEEXTERIOR MOULDING / TRIMWINDSHIELD MOULDING / TRIMSERVICE AND REPAIR
2008 Chevrolet Express 2500 V8-6.6L DSL Turbo
Windshield Moulding / Trim: Service and Repair
2008 Chevrolet Express 2500 V8-6.6L DSL TurboSECTION Service and Repair
Windshield Frame Filler Panel Applique Replacement
Removal Procedure
1. Remove the screws (2) retaining the applique (3) to the filler panel.
2. Pull the applique (3) away from the filler panel in order to release the retainer (1).
3. Remove the applique (3) from the vehicle.
Installation Procedure
1. Install the applique (3) to the vehicle.
2. Install the retainer (1) into the slot in the filler panel. Press the retainer into place.
Notice: Refer to Fastener Notice.
3. Install the screws (2) in order to retain the applique (3) to the upper fender filler panel.
Tighten the screws (2) to 2 N.m (18 lb in).
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.