SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2008CHEVY EXPRESS G3500, VAN PASSENGER EXTENDEDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 996 (WIRING SYSTEMS AND POWER MANAGEMENT - COMPONENT CONNECTOR END VIEW 3 OF 5)INFLATABLE RESTRAINT ROOF RAIL MODULE - RIGHT FRONT (ASF)
2008 Chevrolet Chevy Express G3500, Van Passenger Extended

Inflatable Restraint Roof Rail Module - Right Front (ASF)

2008 Chevrolet Chevy Express G3500, Van Passenger ExtendedSECTION Inflatable Restraint Roof Rail Module - Right Front (ASF)
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Inflatable Restraint Roof Rail Module - Right Front (ASF) Connector End View
GM295469Courtesy of GENERAL MOTORS CORP.
Inflatable Restraint Roof Rail Module - Right Front (ASF)

Pin Wire Color Circuit Function
A 0.5 WH/BK 5022 Roof Rail Module - Right - Low Control
B 0.5 YE/BK 5021 Roof Rail Module - Right - High Control
Connector Part Information 
  • OEM: 12110505
  • Service: 15306044
  • Description: 2-Way F Metri-Pack 150 Series (YE)
Terminal Part Information 
  • Terminal/Tray: Service with Pigtail
  • Core/Insulation Crimp: N/A
  • Release Tool/Test Probe: 12094429/J-35616-2A (GY)
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.