Radio C2 (Except Y91)

2008 Chevrolet Chevy Express G3500, Van Passenger ExtendedSECTION Radio C2 (Except Y91)
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Chevrolet Tahoe, 2007 Chevrolet Suburban, and 2007 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Radio C2 (Except Y91) Connector End View
GM1710972Courtesy of GENERAL MOTORS CORP.
Radio C2 (Except Y91) Connector Parts Information

Connector Part Information 
  • OEM: 13526598
  • Service: 19115675
  • Description: 16-Way F Micro 64 Series (PU)
Terminal Part Information 
  • Terminal/Tray: 15359541/4
  • Core/Insulation Crimp: M/M
  • Release Tool/Test Probe: 15381651-2/J-35616-64B (L-BU)
Radio C2 (Except Y91) Connector Terminal Identification

Pin Wire Color Circuit No. Function
1 BN/WH 367 Remote Radio Left Audio Signal
2 D-GN/WH 368 Remote Radio Right Audio Signal
3 Bare 2099 Drain Wire
4 - - Not Used
5 BN 199 Left Rear Speaker Output (+)
BN/WH 599 Left Rear Low Level Audio Signal (+)
6 D-BU 46 Right Rear Speaker Output (+)
D-BU 546 Right Rear Low Level Audio Signal (+)
7 D-BU 658 Cellular Telephone Voice Signal
8 OG 6978 Amplifier Control
9 TN/WH 372 Remote Radio Audio Output (-)
10 GY 388 Remote Radio Right Audio Signal
11 Bare 1573 Drain Wire
12 - - Not Used
13 YE 116 Left Rear Speaker Output (-)
BN 1999 Left Rear Low Level Audio Signal (-)
14 L-BU 115 Right Rear Speaker Output (-)
TN 1946 Right Rear Low Level Audio Signal (-)
15 L-BU/BK 659 Cellular Telephone Voice Low Reference
16 - - Not Used
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.