Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2008CHEVY EXPRESS G3500, VAN PASSENGER EXTENDEDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 776 (POWER STEERING SYSTEM)COMPONENT LOCATORPOWER STEERING PUMP DISASSEMBLED VIEWPOWER STEERING PUMP
2008 Chevrolet Chevy Express G3500, Van Passenger Extended
Power Steering Pump
2008 Chevrolet Chevy Express G3500, Van Passenger ExtendedSECTION Power Steering Pump
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name |
|---|---|
| 1 | Power Steering Fluid Reservoir |
| 2 | Power Steering Fluid Reservoir Cap |
| 3 | Power Steering Fluid Reservoir Stud |
| 4 | Power Steering Fluid Reservoir Stud |
| 5 | Power Steering Pump Fitting |
| 6 | Power Steering Pump Fitting Seal |
| 7 | Power Steering Pump Flow Control Valve |
| 8 | Power Steering Pump Flow Control Valve Spring |
| 9 | Power Steering Pump Housing Seal |
| 10 | Power Steering Pump Housing Seals |
| 11 | Power Steering Fluid Reservoir Seal |
| 12 | Power Steering Pump |
| 13 | Power Steering Pump Shaft Seal |
| 14 | Power Steering Fluid Reservoir Magnet |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.