Trim Height Specifications

2008 Chevrolet Chevy Express G3500, Van Passenger ExtendedSECTION Trim Height Specifications
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Trim Height Specifications

Model Option Service Allowed Service Preferred Cross Z Height, L-R D Trim Height
Z Trim Height
All Z Trim Height 1500 specs are ±14 mm/2500 specs are ±6 mm.
C1500
Tahoe/Yukon
All 77-105 mm (3.0-4.1 in) 91 mm (3.6 in) 0 ± 12 mm (0.47 in) 0 ± 12 mm (0.47 in)
C1500
Suburban, Yukon XL
All 77-105 mm (3.0-4.1 in) 91 mm (3.6 in) 0 ± 12 mm (0.47 in) 0 ± 12 mm (0.47 in)
C1500
Escalade
All 77-105 mm (3.0-4.1 in) 91 mm (3.6 in) 0 ± 12 mm (0.47 in) 0 ± 12 mm (0.47 in)
C1500
Avalanche
All 77-105 mm (3.0-4.1 in) 91 mm (3.6 in) 0 ± 12 mm (0.47 in) 0 ± 12 mm (0.47 in)
C1500
Tahoe/Yukon
W/Z56 and PPV 70-98 mm (2.8-3.9 in) 84 mm (3.3 in) 0 ± 12 mm (0.47 in) 0 ± 12 mm (0.47 in)
K1500
Tahoe/Yukon
Z95 and HP2 87-115 mm (3.4-4.5 in) 101 mm (4.0 in) 0 ± 12 mm (0.47 in) 0 ± 12 mm (0.47 in)
K1500
Tahoe/Yukon
With Z95 or HP2 77-105 mm (3.0-4.1 in) 91 mm (3.6 in) 0 ± 12 mm (0.47 in) 0 ± 12 mm (0.47 in)
K1500
Suburban, Yukon XL
W/O Z95 87-115 mm (3.4-4.5 in) 101 mm (4.0 in) 0 ± 12 mm (0.47 in) 0 ± 12 mm (0.47 in)
K1500
Suburban, Yukon XL
Z95 77-105 mm (3.0-4.1 in) 91 mm (3.6 in) 0 ± 12 mm (0.47 in) 0 ± 12 mm (0.47 in)
K1500
Escalade, Escalade ESV
W/O Z95 87-115 mm (3.4-4.5 in) 101 mm (4.0 in) 0 ± 12 mm (0.47 in) 0 ± 12 mm (0.47 in)
K1500
Escalade, Escalade ESV
Z95 77-105 mm (3.0-4.1 in) 91 mm (3.6 in) 0 ± 12 mm (0.47 in) 0 ± 12 mm (0.47 in)
K1500
Avalanche, Escalade EXT
W/O Z95 87-115 mm (3.4-4.5 in) 101 mm (4.0 in) 0 ± 12 mm (0.47 in) 0 ± 12 mm (0.47 in)
K1500
Avalanche, Escalade EXT
Z95 77-105 mm (3.0-4.1 in) 91 mm (3.6 in) 0 ± 12 mm (0.47 in) 0 ± 12 mm (0.47 in)
C/K2500
Suburban, Yukon XL
All 110-122 mm (4.3-4.8 in) 116 mm (4.5 in) 0 ± 12 mm (0.47 in) 0 ± 12 mm (0.47 in)
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.