SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2008CHEVY EXPRESS G3500, VAN PASSENGER EXTENDEDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 617 (PROGRAMMING AND SETUP - ALL SYSTEMS)REPAIR INSTRUCTIONSREAR INTEGRATION MODULE PROGRAMMING AND SETUPGENERAL INFORMATION TO SETUP THE REAR INTEGRATION MODULE (RIM)
2008 Chevrolet Chevy Express G3500, Van Passenger Extended

General Information to Setup the Rear Integration Module (RIM)

2008 Chevrolet Chevy Express G3500, Van Passenger ExtendedSECTION General Information to Setup the Rear Integration Module (RIM)
WARNING: This page is about a different car, the 2010 Cadillac STS. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT: The Air Bag indicator light may remain ON after the instrument panel module (IPM) is replaced and during the setup procedure for the IPM until the procedure is completed and the ignition key is cycled OFF and ON.

Before performing any of the setup procedures ensure the following:

  • The scan tool has been updated with the latest software version.
  • The battery is fully charged.
  • All modules on the serial data line are connected.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.