Diagnostic Code Index

2008 Chevrolet Chevy Express G3500, Van Passenger ExtendedSECTION Diagnostic Code Index
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2009 GMC Savana Special, 2009 GMC Savana Camper Special, 2009 GMC Savana, 2009 Chevrolet RV Cutaway, and 2009 Chevrolet Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
DIAGNOSTIC CODE INDEX

DTC Description
DTC P0016 P0016: Crankshaft Position (CKP) Camshaft Position (CMP) Correlation.
DTC P003A P003A: Turbocharger Boost Control Position Not Learned
DTC P0047 or P0048 P0047: Turbocharger Boost Control Solenoid Control Circuit Low Voltage
P0048: Turbocharger Boost Control Solenoid Control Circuit High Voltage
DTC P0087 or P0088 P0087: Fuel Rail Pressure (FRP) Too Low
P0088: Fuel Rail Pressure (FRP) Too High
DTC P0090 P0090: Fuel Pressure Regulator Control Circuit
DTC P0097 or P0098 P0097: Intake Air Temperature (IAT) Sensor 2 Circuit Low Voltage
P0098: Intake Air Temperature (IAT) Sensor 2 Circuit High Voltage
DTC P0101 P0101: Mass Air Flow (MAF) Sensor Performance
DTC P0102 or P0103 P0102: Mass Air Flow (MAF) Sensor Circuit Low Frequency
P0103: Mass Air Flow (MAF) Sensor Circuit High Frequency
DTC P0106 P0106: Manifold Absolute Pressure (MAP) Sensor Performance
DTC P0107 or P0108 P0107: Manifold Absolute Pressure (MAP) Sensor Circuit Low Voltage
P0108: Manifold Absolute Pressure (MAP) Sensor Circuit High Voltage
DTC P0112 or P0113 P0112: Intake Air Temperature (IAT) Sensor Circuit Low Voltage
P0113: Intake Air Temperature (IAT) Sensor Circuit High Voltage
DTC P0116 P0116: Engine Coolant Temperature (ECT) Sensor Performance
DTC P0117 or P0118 P0117: Engine Coolant Temperature (ECT) Sensor Circuit Low Voltage
P0118: Engine Coolant Temperature (ECT) Sensor Circuit High Voltage
DTC P0128 P0128: Engine Coolant Temperature (ECT) Below Thermostat Temperature
DTC P0168 P0168: Engine Fuel Over-Temperature
DTC P0181 P0181: Fuel Temperature Sensor Performance
DTC P0182 or P0183 P0182: Fuel Temperature Sensor Circuit Low Voltage
P0183: Fuel Temperature Sensor Circuit High Voltage
DTC P0191 P0191: Fuel Rail Pressure (FRP) Sensor Performance
DTC P0192 or P0193 P0192: Fuel Rail Pressure (FRP) Sensor Circuit Low Voltage
P0193: Fuel Rail Pressure (FRP) Sensor Circuit High Voltage
DTC P0201, P0202, P0203, P0204, P0205, P0206, P0207, or P0208 P0201: Fuel Injector 1 Control Circuit
P0202: Fuel Injector 2 Control Circuit
P0203: Fuel Injector 3 Control Circuit
P0204: Fuel Injector 4 Control Circuit
P0205: Fuel Injector 5 Control Circuit
P0206: Fuel Injector 6 Control Circuit
P0207: Fuel Injector 7 Control Circuit
P0208: Fuel Injector 8 Control Circuit
DTC P0230 P0230: Fuel Pump Relay Control Circuit
DTC P0234 P0234: Turbocharger Engine Overboost
DTC P0299 P0299: Turbocharger Engine Underboost
DTC P029D, P02A1, P02A5, P02A9, P02AD, P02B1, P02B5, or P02B9 P029D: Injector 1 Leak
P02A1: Injector 2 Leak
P02A5: Injector 3 Leak
P02A9: Injector 4 Leak
P02AD: Injector 5 Leak
P02B1: Injector 6 Leak
P02B5: Injector 7 Leak
P02B9: Injector 8 Leak
DTC P02E0 P02E0: Diesel Intake Air (IA) Flow Control Circuit
DTC P02E7 P02E7: Diesel Intake Air (IA) Flow Position Sensor Performance
DTC P02E8 or P02E9 P02E8: Diesel Intake Air (IA) Flow Position Sensor Circuit Low Voltage
P02E9: Diesel Intake Air (IA) Flow Position Sensor Circuit High Voltage
DTC P0300-P0308 P0300: Engine Misfire Detected
P0301: Cylinder 1 Misfire Detected
P0302: Cylinder 2 Misfire Detected
P0303: Cylinder 3 Misfire Detected
P0304: Cylinder 4 Misfire Detected
P0305: Cylinder 5 Misfire Detected
P0306: Cylinder 6 Misfire Detected
P0307: Cylinder 7 Misfire Detected
P0308: Cylinder 8 Misfire Detected
DTC P0335 P0335: Crankshaft Position (CKP) Sensor Circuit
DTC P0336 P0336: Crankshaft Position (CKP) Sensor Performance
DTC P0340 P0340: Camshaft Position (CMP) Sensor Circuit
DTC P0341 P0341: Camshaft Position (CMP) Sensor Performance
DTC P0401 or P0402 P0401: Exhaust Gas Recirculation (EGR) Flow Insufficient
P0402: Exhaust Gas Recirculation (EGR) Flow Excessive
DTC P0403 or P046C P0403: Exhaust Gas Recirculation (EGR) Solenoid Control Circuit
P046C: Exhaust Gas Recirculation (EGR) Position Sensor Performance
DTC P0405 or P0406 P0405: Exhaust Gas Recirculation (EGR) Position Sensor Circuit Low Voltage
P0406: Exhaust Gas Recirculation (EGR) Position Sensor Circuit High Voltage
DTC P040C or P040D P040C: Exhaust Gas Recirculation (EGR) Temperature Sensor 1 Circuit Low Voltage
P040D: Exhaust Gas Recirculation (EGR) Temperature Sensor 1 Circuit High Voltage
DTC P040F P040F: Exhaust Gas Recirculation (EGR) Temperature Sensor 1-2 Correlation
DTC P041C or P041D P041C: Exhaust Gas Recirculation (EGR) Temperature Sensor 2 Circuit Low Voltage
P041D: Exhaust Gas Recirculation (EGR) Temperature Sensor 2 Circuit High Voltage
DTC P0420 P0420: Catalyst System Low Efficiency
DTC P0506 or P0507 P0506: Idle Speed Low
P0507: Idle Speed High
DTC P0545 or P0546 P0545: Exhaust Temperature Sensor 1 (EGT-1) Circuit Low Voltage
P0546: Exhaust Temperature Sensor 1 (EGT-1) Circuit High Voltage
DTC P0602, P0606, P060B, P061C, P062C, P062F, or P2610 P0602: Control Module Not Programmed
P0606: Control Module Internal Performance
P060B: Control Module Analog to Digital Performance
P061C: Control Module Engine Speed Performance
P062C: Control Module Vehicle Speed Performance
P062F: Control Module Long Term Memory Performance
P2610: Control Module Ignition Off Timer Performance
DTC P0640 P0640: Intake Air (IA) Heater Control Circuit
DTC P0642 or P0643 P0642: 5-Volt Reference 1 Circuit Low Voltage
P0643: 5-Volt Reference 1 Circuit High Voltage
DTC P064C P064C: Glow Plug Module Control Performance
DTC P0650 P0650: Malfunction Indicator Lamp (MIL) Control Circuit
DTC P0652 or P0653 P0652: 5 Volt Reference 2 Circuit Low Voltage
P0653: 5 Volt Reference 2 Circuit High Voltage
DTC P0671-P0678 P0671: Cylinder #1 Glow Plug Control Circuit
P0672: Cylinder #2 Glow Plug Control Circuit
P0673: Cylinder #3 Glow Plug Control Circuit
P0674: Cylinder #4 Glow Plug Control Circuit
P0675: Cylinder #5 Glow Plug Control Circuit
P0676: Cylinder #6 Glow Plug Control Circuit
P0677: Cylinder #7 Glow Plug Control Circuit
P0678: Cylinder #8 Glow Plug Control Circuit
DTC P0698 or P0699 P0698: 5-Volt Reference 3 Circuit Low Voltage
P0699: 5-Volt Reference 3 Circuit High Voltage
DTC P0700 P0700: Transmission Control Module (TCM) Requested MIL Illumination
DTC P1224, P1227, P122A, P1233, P1236, P1239, P1242, or P1247 P1224: Fuel Injector 1 Control Circuit Shorted
P1227: Fuel Injector 2 Control Circuit Shorted
P122A: Fuel Injector 3 Control Circuit Shorted
P1233: Fuel Injector 4 Control Circuit Shorted
P1236: Fuel Injector 5 Control Circuit Shorted
P1239: Fuel Injector 6 Control Circuit Shorted
P1242: Fuel Injector 7 Control Circuit Shorted
P1247: Fuel Injector 8 Control Circuit Shorted
DTC P1448 P1448: Diesel Particulate Filter Regeneration Frequency Too Low
DTC P150C P150C: Transmission Control Module (TCM) Engine Speed Request Circuit
DTC P154A P154A: Intake Air (IA) Heater Feedback Circuit
DTC P154B P154B: Intake Air (IA) Heater Voltage Signal Circuit
DTC P154C P154C: Intake Air (IA) Heater Current Signal Circuit.
DTC P154D P154D: Intake Air (IA) Heater Temperature Signal Circuit.
DTC P160C P160C: Engine Calibration Information Not Programmed-GPCM
DTC P166B P166B: Intake Air (IA) Heater Over Temperature
DTC P166C P166C: Intake Air (IA) Heater Resistance.
DTC P2002 P2002: Diesel Particulate Filter Efficiency
DTC P2032 or P2033 P2032: Exhaust Temperature Sensor 2 (EGT-2) Circuit Low Voltage
P2033: Exhaust Temperature Sensor 2 (EGT-2) Circuit High Voltage
DTC P20E2 P20E2: Exhaust Temperature Sensor 1-2 Correlation
DTC P2122, P2123, P2127, P2128, or P2138 P2122: Accelerator Pedal Position (APP) Sensor 1 Circuit Low Voltage
P2123: Accelerator Pedal Position (APP) Sensor 1 Circuit High Voltage
P2127: Accelerator Pedal Position (APP) Sensor 2 Circuit Low Voltage
P2128: Accelerator Pedal Position (APP) Sensor 2 Circuit High Voltage
P2138: Accelerator Pedal Position (APP) Sensor 1-2 Correlation
DTC P2146, P2149, P2152, or P2155 P2146: Injector Positive Voltage Control Circuit Group 1
P2149: Injector Positive Voltage Control Circuit Group 2
P2152: Injector Positive Voltage Control Circuit Group 3
P2155: Injector Positive Voltage Control Circuit Group 4
DTC P2228 or P2229 P2228: Barometric Pressure (BARO) Sensor Circuit Low Voltage
P2229: Barometric Pressure (BARO) Sensor Circuit High Voltage
DTC P2266 P2266: Water in Fuel Sensor Circuit Low Voltage
DTC P2269 P2269: Water in Fuel
DTC P244B P244B: Diesel Particulate Filter Differential Pressure Too High
DTC P244C P244C: Catalyst Temperature Too Low During Regeneration
DTC P2453 P2453: Particulate Matter Trap Differential Pressure Sensor Signal Performance
DTC P2454 or P2455 P2454: Diesel Particulate Filter Differential Pressure Sensor Circuit Low Voltage
P2455: Diesel Particulate Filter Differential Pressure Sensor Circuit High Voltage
DTC P2457 P2457: Exhaust Gas Recirculation (EGR) Cooling System Performance
DTC P2459 P2459: Diesel Particulate Filter Regeneration Too Often
DTC P2463 P2463: Diesel Particulate Filter Soot Level Accumulation
DTC P2510 P2510: Engine Control Module Relay Circuit
DTC P2544 P2544: Transmission Torque Request Circuit
DTC P2563 P2563: Turbocharger Boost Control Position Sensor Performance
DTC P2564 or P2565 P2564: Turbocharger Boost Control Position Sensor Circuit Low Voltage
P2565: Turbocharger Boost Control Position Sensor Circuit High Voltage
DTC P268A P268A: Fuel Injector Calibration Data Not Programmed
DTC P268C-P268F or P2690-P2693 P268C: Injector 1 Calibration Incorrect
P268D: Injector 2 Calibration Incorrect
P268E: Injector 3 Calibration Incorrect
P268F: Injector 4 Calibration Incorrect
P2690: Injector 5 Calibration Incorrect
P2691: Injector 6 Calibration Incorrect
P2692: Injector 7 Calibration Incorrect
P2693: Injector 8 Calibration Incorrect
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.