Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2008CHEVY EXPRESS G3500, VAN PASSENGER EXTENDEDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 534 (POWER STEERING SYSTEM)SPECIFICATIONSFASTENER TIGHTENING SPECIFICATIONS
2008 Chevrolet Chevy Express G3500, Van Passenger Extended
Fastener Tightening Specifications
2008 Chevrolet Chevy Express G3500, Van Passenger ExtendedSECTION Fastener Tightening Specifications
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2009 GMC Savana Special, 2009 GMC Savana Camper Special, 2009 GMC Savana, 2009 Chevrolet RV Cutaway, and 2009 Chevrolet Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Accessory Mounting Bracket Bolts and Nut | 50 N.m | 37 lb ft |
| Adjuster Lock Nut | 49 N.m | 36 lb ft |
| Adjuster Plug Lock Nut | 68 N.m | 50 lb ft |
| Cylinder Lines to Gear Fitting-Cylinder End | 27 N.m | 20 lb ft |
| Cylinder Lines to Gear Fitting-Valve End | 17 N.m | 13 lb ft |
| Hydraulic Brake Booster Inlet and Outlet Hose Fittings | 33 N.m | 24 lb ft |
| Inner Tie Rod to Power Steering Gear | 100 N.m | 74 lb ft |
| Lower Intermediate Steering Shaft to Steering Gear Retaining Bolt | 61 N.m | 45 lb ft |
| Outer Tie Rod to Steering Knuckle Retaining Nut | 63 N.m | 47 lb ft |
| Pitman Arm to Power Steering Gear Mounting Nut | 250 N.m | 184 lb ft |
| Pitman Arm to Relay Rod Retaining Nut | 63 N.m | 47 lb ft |
| Pitman Shaft Side Cover Bolts | 62 N.m | 46 lb ft |
| Power Steering Cooler Hose to Power Steering Gear | 33 N.m | 24 lb ft |
| Power Steering Cooler Mounting Bolts (GT4) | 5 N.m | 44 lb in |
| Power Steering Cooler Mounting Nuts (GT5) | 28 N.m | 21 lb ft |
| Power Steering Gear End Housing Bolts | 62 N.m | 46 lb ft |
| Power Steering Gear Mounting Bolts | 150 N.m | 111 lb ft |
| Power Steering Gear Outlet Hose to the Steering Gear | 33 N.m | 24 lb ft |
| Power Steering Pump Flow Control Valve to Power Steering Pump | 75 N.m | 55 lb ft |
| Power Steering Pump Front Mounting Bolts | 50 N.m | 37 lb ft |
| Power Steering Pump Lower and Rear Mounting Nuts (4.3L) | 41 N.m | 30 lb ft |
| Power Steering Pump Mounting Studs | 58 N.m | 43 lb ft |
| Power Steering Pump Rear Bracket Mounting Nuts | 50 N.m | 37 lb ft |
| Power Steering Pump Rear Mounting Bolt (4.8L, 5.3L, 6.0L, and 6.6L) | 41 N.m | 30 lb ft |
| Power Steering Remote Reservoir Retaining Nuts | 11 N.m | 97 lb in |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.