Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Rear Heated Seat Module
- Left or Right Rear Seat HVC Mode
-
The scan tool displays Back & Cushion whenever the seat cushion heater is commanded on.
- Left or Right Rear Seat HVC Level
-
The scan tool displays the commanded state of the seat temperature setting.
- Left or Right Rear Seat Cushion Heat Status
-
The scan tool displays Active whenever the seat cushion heater is commanded on.
- Seat Heat Supply Voltage
-
The scan tool displays Active whenever the seat cushion heater is commanded on.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.