SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2008CHEVY EXPRESS G3500, VAN PASSENGER EXTENDEDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 396 (INSTRUMENT PANEL TRIM AND CONSOLE TRIM)SPECIFICATIONSFASTENER TIGHTENING SPECIFICATIONS
2008 Chevrolet Chevy Express G3500, Van Passenger Extended

Fastener Tightening Specifications

2008 Chevrolet Chevy Express G3500, Van Passenger ExtendedSECTION Fastener Tightening Specifications
WARNING: This page is about a different car, the 2009 Cadillac STS. However, it is still accessible from the selected car via links, so may be relevant.
Application Specification
Metric English
Center Support Bracket to Carrier 9 N.m 80 lb in
Console Mounting Fasteners 25 N.m 18 lb ft
Front Floor Console Armrest Storage Tray Fasteners 2 N.m 18 lb in
Front Floor Console Ashtray Fasteners 2 N.m 18 lb in
Hood Release Lever Fasteners 2 N.m 18 lb in
HVAC Outlet Duct to Carrier 2 N.m 18 lb in
Instrument Panel Carrier to Cowl 25 N.m 18 lb ft
Instrument Panel Center Trim to Retainer 2 N.m 18 lb in
Instrument Panel Compartment Bin Screws 2 N.m 18 lb in
Instrument Panel Compartment Dampener Fastener 2 N.m 18 lb in
Instrument Panel Compartment Door Screws 2 N.m 18 lb in
Instrument Panel Retainer to Floor Bracket 9 N.m 80 lb in
Insulator Panel to Instrument Panel 2 N.m 18 lb in
Knee Bolster Bracket to Instrument Panel 9 N.m 80 lb in
Knee Bolster Trim Screws 2 N.m 18 lb in
Lower Instrument Panel Retainer to Carrier 2 N.m 18 lb in
Park Brake Bracket to Carrier 25 N.m 18 lb ft
Park Brake Release Lever Fasteners 2 N.m 18 lb in
Radio to Instrument Panel 9 N.m 80 lb in
SIR Instrument Panel Module 9 N.m 80 lb in
Upper Instrument Panel Retainer to Carrier 9 N.m 80 lb in
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.