Fastener Tightening Specifications

2008 Chevrolet Chevy Express G3500, Van Passenger ExtendedSECTION Fastener Tightening Specifications
WARNING: This page is about a different car, the 2009 Cadillac STS. However, it is still accessible from the selected car via links, so may be relevant.
Application Specification
Metric English
Front Bumper Fascia Bolts 6 N.m 53 lb in
Front Bumper Fascia Reinforcement Nuts 6 N.m 53 lb in
Front Bumper Impact Bar Nuts 25 N.m 18 lb ft
Rear Bumper Fascia Bracket Bolts 3 N.m 27 lb in
Rear Bumper Fascia Nuts 6 N.m 53 lb in
Rear Bumper Fascia Screws 3 N.m 27 lb in
Rear Bumper Impact Bar Bolts 25 N.m 18 lb ft
Rear Energy Absorber Bolts 25 N.m 18 lb ft
Rear Energy Absorber Nuts 25 N.m 18 lb ft
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.