Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2008CHEVY EXPRESS G3500, VAN PASSENGER EXTENDEDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 366 (FRONT DRIVE AXLE)SPECIAL TOOLS AND EQUIPMENTSPECIAL TOOLS
2008 Chevrolet Chevy Express G3500, Van Passenger Extended
Special Tools
2008 Chevrolet Chevy Express G3500, Van Passenger ExtendedSECTION Special Tools
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
| Illustration | Tool Number/ Description |
|---|---|
| J 2619-01 Slide Hammer |
|
| J 8001 Dial Indicator Set |
|
| J 8092 Driver Handle |
|
| J 8614-01 Flange and Pulley Holding Tool |
|
| J 22761 Differential Side Bearing Installer |
|
| J 22888-D Side Bearing Remover Kit |
|
| J 22912-01 Rear Pinion and Axle Bearing Remover |
|
| J 29369-1 Bushing and Bearing Remover |
|
| J 29369-2 Bushing and Bearing Remover - 2-3 in |
|
| J 29710 Differential Side Bearing Installer |
|
| J 29763 Static Timing Gage |
|
| J 33791 Carrier Bushing Remover/Installer |
|
| J 33842 Pilot Bearing Installer |
|
| J 34011 Pilot Bearing Remover |
|
| J 34672 Depth Micrometer |
|
| J 34673 Flat Gage Bar |
|
| J 36597 Side Bearing Puller Pilot - 9.25 Inch Axle |
|
| J 36598 Holding Fixture |
|
| J 36599-A Side Bearing Nut Wrench |
|
| J 36601 Pinion Shim Selector |
|
| J 36609 Axle Tube Bearing Installer |
|
| J 36615 Side Bearing Nut Wrench |
|
| J 36616 Axle Mount Bushing Remover/Installer |
|
| J 45225 Axle Seal Installer |
|
| J 45754 Pinion Bearing Race Remover/Installer - 9.25 Inch Axle |
|
| J 45765 Pinion Remover - 8.25 inch/9.25 inch Axles |
|
| J 45858 Pinion Bearing Race Remover/Installer - 8.25 Inch Axle |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.