SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2008CHEVY EXPRESS G3500, VAN PASSENGER EXTENDEDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 33 (ADJUSTABLE PEDAL SYSTEM)COMPONENT LOCATORADJUSTABLE PEDAL CONNECTORSELECTRONIC ADJUSTABLE PEDAL ASSEMBLY
2008 Chevrolet Chevy Express G3500, Van Passenger Extended

Electronic Adjustable Pedal Assembly

2008 Chevrolet Chevy Express G3500, Van Passenger ExtendedSECTION Electronic Adjustable Pedal Assembly
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Chevrolet Tahoe, 2007 Chevrolet Suburban, and 2007 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Electronic Adjustable Pedal Assembly Connector End View
GM1711022Courtesy of GENERAL MOTORS CORP.
Electronic Adjustable Pedal Assembly Connector Parts Information

Connector Part Information 
  • OEM: 15477860
  • Service: See Catalog
  • Description: 6-Way F BFC 180 Series (BK)
Terminal Part Information 
  • Terminal/Tray: 173630-7/7
  • Core/Insulation Crimp: Pins 1-3: E/4
  • Core/Insulation Crimp: Pins 4-5: E/A
  • Release Tool/Test Probe: 15315247/J-35616-33 (YE)
Electronic Adjustable Pedal Assembly Connector Terminal Identification

Pin Wire Color Circuit No. Function
1 TN 6207 5-Volt Reference (AN3)
2 PK 5289 Adjustable Pedal Sensor Signal (AN3)
3 GY 6206 Low Reference (AN3)
4 YE 5129 Adjustable Pedal Motor Rearward Control
5 PU 5130 Adjustable Pedal Motor Forward Control
6 - - Not Used
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.