SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2008CHEVY EXPRESS G3500, VAN PASSENGER EXTENDEDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 131 (WIRING SYSTEMS AND POWER MANAGEMENT - COMPONENT VIEWS & COMPONENT CONNECTOR END VIEWS)COMPONENT CONNECTOR END VIEWSHEATED SEAT CONTROL MODULE - DRIVER X1
2008 Chevrolet Chevy Express G3500, Van Passenger Extended

Heated Seat Control Module - Driver X1

2008 Chevrolet Chevy Express G3500, Van Passenger ExtendedSECTION Heated Seat Control Module - Driver X1
WARNING: This page is about a different car, the 2008 Chevrolet Malibu Classic. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Heated Seat Control Module - Driver X1 Connector End View
GM1415180Courtesy of GENERAL MOTORS CORP.
Heated Seat Control Module - Driver X1

Pin Wire Circuit Function
1 0.35 BK 1150 Ground
2 0.5 L-BU/BK 1505 Driver Heated Seat Switch Signal
3 0.5 YE 243 Accessory Voltage
4 0.5 RD/WH 1140 Battery Positive Voltage
Connector Part Information 
  • OEM: 7283-5629-40
  • Service: See Catalog
  • Description: 4-Way F YESC/USCAR Class II Series (GY)
Terminal Part Information 
  • Pins: 1,4
  • Terminal/Tray: 7116-4111-02/9
  • Core/Insulation Crimp: E/A
  • Release Tool/Test Probe: 12094430/J-35616-4A (PU)
  • Pins: 2-3
  • Terminal/Tray: 7116-4100-08/9
  • Core/Insulation Crimp: E/C
  • Release Tool/Test Probe: 12094430/J-35616-2A (GY)
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.