SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2008CHEVY EXPRESS G3500, VAN PASSENGER EXTENDEDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 131 (WIRING SYSTEMS AND POWER MANAGEMENT - COMPONENT VIEWS & COMPONENT CONNECTOR END VIEWS)COMPONENT CONNECTOR END VIEWSADJUSTABLE PEDAL MODULE
2008 Chevrolet Chevy Express G3500, Van Passenger Extended

Adjustable Pedal Module

2008 Chevrolet Chevy Express G3500, Van Passenger ExtendedSECTION Adjustable Pedal Module
WARNING: This page is about a different car, the 2008 Chevrolet Malibu Classic. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Adjustable Pedal Module Connector End View
GM39746Courtesy of GENERAL MOTORS CORP.
Adjustable Pedal Module

Pin Wire Circuit Function
A 0.35 L-BU 5499 Adjustable Pedal Enable Signal
B 0.35 PK 5289 Adjustable Pedals Position Sensor Signal
C - - Not Used
D 0.35 BN/WH 5288 Adjustable Pedals Position Sensor Low Reference
E 0.8 BK/WH 651 Ground
F 0.35 WH 5287 Adjustable Pedals Position Sensor 5-Volt Reference
G 0.35 L-GN 5980 Adjustable Pedal Inhibit Signal
H 0.35 RD/WH 740 Battery Positive Voltage
Connector Part Information 
  • OEM: 12064862
  • Service: 12126438
  • Description: 8-Way F Metri-Pack 150 Series (BK)
Terminal Part Information 
  • Pins: A-B, D, F-H
  • Terminal/Tray: 12064971/5
  • Core/Insulation Crimp: E/C
  • Release Tool/Test Probe: 12094429/J-35616-2A (GY)
  • Pins: E
  • Terminal/Tray: 12047767/2
  • Core/Insulation Crimp: E/A
  • Release Tool/Test Probe: 12094429/J-35616-2A (GY)
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.