SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2008CHEVY EXPRESS G3500, VAN PASSENGER EXTENDEDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1008 (WIRING SYSTEMS AND POWER MANAGEMENT - COMPONENT CONNECTOR END VIEWS - 2 OF 5)DISTANCE SENSING CRUISE CONTROL MODULE (K59)
2008 Chevrolet Chevy Express G3500, Van Passenger Extended

Distance Sensing Cruise Control Module (K59)

2008 Chevrolet Chevy Express G3500, Van Passenger ExtendedSECTION Distance Sensing Cruise Control Module (K59)
WARNING: This page is about a different car, the 2008 Cadillac STS. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Distance Sensing Cruise Control Module (K59) Connector End View
GM1420665Courtesy of GENERAL MOTORS CORP.
Distance Sensing Cruise Control Module (K59)

Pin Wire Circuit Function
1 0.35 RD/WH 340 Battery Positive Voltage
2 - - Not Used
3 0.35 YE 5727 High Speed GMLAN Serial Data Wake Up (TT7/TT8+K59)
0.35 YE 5727 High Speed GMLAN Serial Data Wake Up (TT6+/K59)
4 0.35 TN/BK 2500 High Speed GMLAN Serial Data (+) (1)
5 0.35 TN 2501 High Speed GMLAN Serial Data (-) (1)
6 0.35 BK 250 Ground
Connector Part Information 
  • OEM: 2-967616-1
  • Service: 88953345
  • Description: 6-Way F Micro Series Sealed (GY)
Terminal Part Information 
  • Terminal/Tray: 962885-5/15
  • Core/Insulation Crimp: 6/6
  • Release Tool/Test Probe: 12094429/J-35616-64B (L-BU)
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.