Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2008CHEVY EXPRESS G3500, VAN CARGO EXTENDED, 4.8 CREPAIR AND DIAGNOSISBRAKESANTI-LOCK BRAKE SYSTEM, TRACTION CONTROL SYSTEM & STABILITY CONTROL SYSTEMREPAIR INSTRUCTIONSVEHICLE YAW SENSOR WITH VEHICLE LATERAL ACCELEROMETER REPLACEMENTINSTALLATION PROCEDURE
2008 Chevrolet Chevy Express G3500, Van Cargo Extended, 4.8 C
Installation Procedure
2008 Chevrolet Chevy Express G3500, Van Cargo Extended, 4.8 CSECTION Installation Procedure
- Install the yaw rate sensor/lateral accelerometer (1) to the vehicle.
- Install the nuts (2) retaining the yaw rate sensor/lateral accelerometer (1) to the vehicle.
Tighten: Tighten the nuts to 10 N.m (89 lb in).
- Perform the YAW rate reference table reset procedure. Refer to Yaw Rate Reference Table Resetting .
- Connect the electrical connector (3) to the yaw rate sensor/lateral accelerometer (1).
- Install the carpet.
- Install the passenger seat to the vehicle. Refer to Seat Replacement .
NOTE:
Refer to Fastener Notice
.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.