Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2008CHEVY EXPRESS G3500, VAN CARGO EXTENDED, 4.8 CREPAIR AND DIAGNOSISBRAKESANTI-LOCK BRAKE SYSTEM, TRACTION CONTROL SYSTEM & STABILITY CONTROL SYSTEMDIAGNOSTIC INFORMATION AND PROCEDURESDTC C0161 (W/JL4)CONDITIONS FOR SETTING THE DTC
2008 Chevrolet Chevy Express G3500, Van Cargo Extended, 4.8 C
Conditions for Setting the DTC
2008 Chevrolet Chevy Express G3500, Van Cargo Extended, 4.8 CSECTION Conditions for Setting the DTC
Any of the following conditions may cause the DTC to set:
- Voltage on the TCC brake switch signal circuit is always low.
- Voltage on the TCC brake switch signal circuit is always high.
- Voltage on the TCC brake switch signal circuit is high for 0.54 seconds when voltage is expected to be low.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.