Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2008CHEVY EXPRESS G2500, VAN CARGO, 6.6 6REPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 940 (FRONT SUSPENSION SYSTEM)REPAIR INSTRUCTIONSSHOCK, SHOCK COMPONENT, AND/OR SPRING REPLACEMENT (ESC)
2008 Chevrolet Chevy Express G2500, Van Cargo, 6.6 6
Shock, Shock Component, and/or Spring Replacement (ESC)
2008 Chevrolet Chevy Express G2500, Van Cargo, 6.6 6SECTION Shock, Shock Component, and/or Spring Replacement (ESC)
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Chevrolet Tahoe, 2007 Chevrolet Suburban, and 2007 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Shock, Shock Component, and/or Spring Replacement (ESC)
| Callout | Component Name |
|---|---|
| Preliminary Procedure: Remove the shock module. Refer to Shock Module Replacement . |
|
| 1 | Tenon Nut
NOTE:
Do not allow the absorber rod to rotate during disassembly/reassembly. Use hand tools to keep the absorber rod from rotating. If air tools are used, and the rod is allowed to rotate, damage to the absorber may occur. RENDER: 1.0x NO RELATED Recommended Tools & Savings Use the Manual With the Right HardwarePair factory procedures with proven DIY tools so the instructions are easier to execute. Affiliate disclosure: We may earn a commission at no extra cost to you. When to See a MechanicStop DIY work and contact a certified mechanic immediately if any of the following apply:
|