Special Tools

2008 Chevrolet Chevy Express G2500, Van Cargo, 6.6 6SECTION Special Tools
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Chevrolet Tahoe, 2007 Chevrolet Suburban, and 2007 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Special Tools

Illustration Tool Number/ Description
GM2015Courtesy of GENERAL MOTORS CORP.
J 8092
Driver Handle
GM156502Courtesy of GENERAL MOTORS CORP.
J 21128
Axle Pinion Oil Seal Installer
GM156504Courtesy of GENERAL MOTORS CORP.
J 23690
Bearing Installer
GM982Courtesy of GENERAL MOTORS CORP.
J 2619-01
Slide Hammer
GM70139Courtesy of GENERAL MOTORS CORP.
J 39700
100-Pin Breakout Box
GM394652Courtesy of GENERAL MOTORS CORP.
J 39700-325
Breakout Box Adapter
GM893397Courtesy of GENERAL MOTORS CORP.
J 39700-650
Adapter Cable
GM886783Courtesy of GENERAL MOTORS CORP.
J 45857
Tone Wheel and/or Bearing Remover
GM885527Courtesy of GENERAL MOTORS CORP.
J 45860
Tone Ring Installer
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.