SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2008CHEVY EXPRESS G2500, VAN CARGO, 6.6 6REPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 899 (CELLULAR SYSTEM, ENTERTAINMENT SYSTEM, AND NAVIGATION SYSTEM)COMPONENT LOCATORENTERTAINMENT/COMMUNICATION CONNECTORSREAR SEAT AUDIO (RSA) CONTROLLER C2 (UQA/UQS)
2008 Chevrolet Chevy Express G2500, Van Cargo, 6.6 6

Rear Seat Audio (RSA) Controller C2 (UQA/UQS)

2008 Chevrolet Chevy Express G2500, Van Cargo, 6.6 6SECTION Rear Seat Audio (RSA) Controller C2 (UQA/UQS)
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Chevrolet Tahoe, 2007 Chevrolet Suburban, and 2007 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Rear Seat Audio (RSA) Controller C2 (UQA/UQS) Connector End View
GM1715231Courtesy of GENERAL MOTORS CORP.
Rear Seat Audio (RSA) Controller C2 (UQA/UQS) Connector Parts Information

Connector Part Information 
  • OEM: 15394152
  • Service: 19115676
  • Description: 16-Way F Micro 64 Series (GN)
Terminal Part Information 
  • Terminal/Tray: 15359541/4
  • Core/Insulation Crimp: M/M
  • Release Tool/Test Probe: 15381651-2/J-35616-64B (L-BU)
Rear Seat Audio (RSA) Controller C2 (UQA/UQS) Connector Terminal Identification

Pin Wire Color Circuit No. Function
1 BN/WH 599 Left Rear Low Level Audio Signal (+)
2 BN 1999 Left Rear Low Level Audio Signal (-)
3 D-BU 546 Right Rear Low Level Audio Signal (+)
4 TN 1946 Right Rear Low Level Audio Signal (-)
5-8 - - Not Used
9 BN/WH 599 Left Rear Low Level Audio Signal (+)
10 BN 1999 Left Rear Low Level Audio Signal (-)
11 D-BU 546 Right Rear Low Level Audio Signal (+)
12 TN 1946 Right Rear Low Level Audio Signal (-)
13-16 - - Not Used
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.