SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2008CHEVY EXPRESS G2500, VAN CARGO, 6.6 6REPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 897 (SUPPLEMENTAL INFLATABLE RESTRAINT SYSTEM)COMPONENT LOCATORSIR CONNECTORSINFLATABLE RESTRAINT FRONT END SENSOR - RIGHT
2008 Chevrolet Chevy Express G2500, Van Cargo, 6.6 6

Inflatable Restraint Front End Sensor - Right

2008 Chevrolet Chevy Express G2500, Van Cargo, 6.6 6SECTION Inflatable Restraint Front End Sensor - Right
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Chevrolet Tahoe, 2007 Chevrolet Suburban, and 2007 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Inflatable Restraint Front End Sensor - Right Connector End View
GM1413072Courtesy of GENERAL MOTORS CORP.
Inflatable Restraint Front End Sensor - Right Connector Parts Information

Connector Part Information 
  • OEM: 15356717
  • Service: 88953273
  • Description: 2-Way F GT 150 (YE)
Terminal Part Information 
  • Terminal/Tray: Service with Pigtail
  • Core/Insulation Crimp: N/A
  • Release Tool/Test Probe: 15315247/J-35616-2A (GY)
Inflatable Restraint Front End Sensor - Right Connector Terminal Identification

Pin Wire Color Circuit No. Function
1 D-GN 1409 Discriminating Sensor - Right - Signal
2 GY 5600 Low Reference
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.