Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2008CHEVY EXPRESS G2500, VAN CARGO, 6.6 6REPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 798 (LIGHTING SYSTEM)COMPONENT LOCATORLIGHTING SYSTEMS CONNECTOR END VIEWSTURN SIGNAL/MULTIFUNCTION SWITCH
2008 Chevrolet Chevy Express G2500, Van Cargo, 6.6 6
Turn Signal/Multifunction Switch
2008 Chevrolet Chevy Express G2500, Van Cargo, 6.6 6SECTION Turn Signal/Multifunction Switch
WARNING: This page is about a different car, the 2007 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
Turn Signal/Multifunction Switch Connector Parts Information
Connector Part Information
|
Turn Signal/Multifunction Switch Connector Terminal Identification
| Pin | Wire Color | Circuit No. | Function |
|---|---|---|---|
| 1 | BK | 550 | Ground |
| 2 | L-BU | 14 | Left Turn Signal Lamps Supply Voltage |
| 3 | OG | 240 | Battery Positive Voltage (w/o T82) |
| GY | 691 | Headlamp Relay Output (w/T82) | |
| 4 | PU | 16 | Turn Signal Flasher Signal |
| 5 | D-BU | 1201 | Headlamp Low Beam Signal |
| 6 | D-BU | 15 | Right Turn Signal Lamps Supply Voltage |
| 7 | PK | 1200 | Headlamp High Beam Signal |
| 8 | BN | 9 | Park Lamp Supply Voltage (w/o T82) |
| L-BU | 74 | Park Lamp Switch Signal (w/T82) |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.