Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2008CHEVY EXPRESS G2500, VAN CARGO, 6.6 6REPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 532 (CRUISE CONTROL SYSTEM)DIAGNOSTIC INFORMATION AND PROCEDURESSCAN TOOL DATA LIST
2008 Chevrolet Chevy Express G2500, Van Cargo, 6.6 6
Scan Tool Data List
2008 Chevrolet Chevy Express G2500, Van Cargo, 6.6 6SECTION Scan Tool Data List
WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
Powertrain Control Module (PCM) Scan Tool Data List
| Scan Tool Parameter | Data List | Units Displayed | Typical Data Value |
|---|---|---|---|
| Ignition ON/Engine Idling at Normal Operating Temperature/Vehicle is in Park or Neutral/Cruise On/Off Switch is Turned Off | |||
| Clutch Pedal Switch | Cruise Control Data | Applied/Released | Released |
| Cruise Control Active | Cruise Control Data | Yes/No | No |
| Cruise Disengage (1 - 8) History | Cruise Control Data | The last reason for cruise control disengagement | Varies |
| Cruise On/Off Switch | Cruise Control Data | On/Off | Off |
| Cruise Release Brake Pedal Switch | Cruise Control Data | Applied/Released | Released |
| Cruise Resume/Accel. Switch | Cruise Control Data | On/Off | Off |
| Cruise Set/Coast Switch | Cruise Control Data | On/Off | Off |
| Engine Speed | Cruise Control Data | RPM | Varies |
| Extended Travel Brake Pedal Switch | Engine Data 1 | Applied/Released | Released |
| Ignition 1 Signal | Cruise Control Data | Volts | 12 to 14 Volts |
| Reduced Engine Power | Cruise Control Data | Active/Inactive | Inactive |
| Stop Lamp Pedal Switch | Cruise Control Data | Applied/Released | Released |
| TAC/PCM Communication Signal | Cruise Control Data | OK/Fault | OK |
| Traction Control Signal | Cruise Control Data | Active/Inactive | Active |
| Vehicle Speed Sensor | Cruise Control Data | km/h (mph) | 0 km/h (0 mph) |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.