Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Digital Radio Receiver Setup
Important: The Digital Radio Receiver Setup option does not contain a submenu. Digital Radio Receiver Setup will configure the following systems:
- DTCs
- Class 2 radio messages
For the Digital Radio Receiver, complete the following procedure with the key in the ON position, use a scan tool in order to properly set up communication:
- At the Main Menu screen, select Diagnostics.
- At the Vehicle Identification screen, select the following options:
- 2.1. Model Year
- 2.2. Vehicle Line
- At the System Selection Menu screen, select Body.
- At the Vehicle Identification screen, select the following:
- 4.1. Platform Type
- 4.2. Body Type
- At the Body screen, select Digital Radio Receiver.
- Select Special Functions.
- At the Special Functions screen, select DRR Setup.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.