Rear Integration Module (RIM) X3

2008 Chevrolet Chevy Express G2500, Van Cargo, 6.6 6SECTION Rear Integration Module (RIM) X3
WARNING: This page is about a different car, the 2008 Cadillac STS. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Rear Integration Module (RIM) - X3 Connector End View
GM1420731Courtesy of GENERAL MOTORS CORP.
Rear Integration Module (RIM) X3

Pin Wire Circuit Function
1 0.35 D-BU/WH 1315 Right Front Turn Signal Lamp Supply Voltage
2 0.35 L-BU/WH 1314 Left Front Turn Signal Lamp Supply Voltage
3 - - Not Used
4 0.35 RD/BK 542 Battery Positive Voltage
5-9 - - Not Used
10 0.35 D-GN 5060 Low Speed GMLAN Serial Data
11 - - Not Used
12 0.35 YE 18 Left Rear Stop/Turn Lamp Supply Voltage
Connector Part Information 
  • OEM: 174045-2
  • Service: 88987954
  • Description: 12-Way M 40 Series Multi-Lock (BK)
Terminal Part Information 
  • Terminal/Tray: 173681-2/17
  • Core/Insulation Crimp: E/4
  • Release Tool/Test Probe: 15315247/J-35616-16 (L-GN)
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.