SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2008CHEVY EXPRESS G2500, VAN CARGO, 6.6 6REPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 2675 (OEM CONNECTOR END VIEWS - SIERRA & SILVERADO - LIGHTING SYSTEMS, MIRROR, OBJECT DETECTION, POWER AND GROUNDING, POWER OUTLET, POWER SEAT, POWER TAKE-OFF (PTO), REMOTE FUNCTION, SEAT BELT, SECONDARY/CONFIGURABLE CONTROL, SHIFT LOCK CONTROL, SIR)POWER SEAT CONNECTOR END VIEWSSEAT ADJUSTER ASSEMBLY CONNECTOR END VIEW - PASSENGER
2008 Chevrolet Chevy Express G2500, Van Cargo, 6.6 6

Seat Adjuster Assembly Connector End View - Passenger

2008 Chevrolet Chevy Express G2500, Van Cargo, 6.6 6SECTION Seat Adjuster Assembly Connector End View - Passenger
WARNING: This page is about a different car, the 2007 GMC Sierra and 2007 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Seat Adjuster Assembly - Passenger Connector End View
GM1519696Courtesy of GENERAL MOTORS CORP.
Seat Adjuster Assembly - Passenger Connector Parts Information

Connector Part Information 
  • OEM: 7283-6466-40
  • Service: See Catalog
  • Description: 6-Way F YESC 2.8 MM (GY)
Terminal Part Information 
  • Terminal/Tray: 7116-4112-02/9
  • Core/Insulation Crimp: C/D
  • Release Tool/Test Probe: 12094430/J-35616-35 (PU)
Seat Adjuster Assembly - Passenger Connector Terminal Identification

Pin Wire Color Circuit No. Function
1 3 YE 288 Passenger Seat Rear Vertical Motor Up Control
2 3 D-GN 297 Passenger Seat Front Vertical Motor Up Control
3 3 TN 296 Passenger Seat Horizontal Motor Forward Control
4 3 L-BU 289 Passenger Seat Rear Vertical Motor Down Control
5 3 D-BU 298 Passenger Seat Front Vertical Motor Down Control
6 3 L-GN 290 Passenger Seat Horizontal Motor Rearward Control
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.