SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2008CHEVY EXPRESS G2500, VAN CARGO, 6.6 6REPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 2675 (OEM CONNECTOR END VIEWS - SIERRA & SILVERADO - LIGHTING SYSTEMS, MIRROR, OBJECT DETECTION, POWER AND GROUNDING, POWER OUTLET, POWER SEAT, POWER TAKE-OFF (PTO), REMOTE FUNCTION, SEAT BELT, SECONDARY/CONFIGURABLE CONTROL, SHIFT LOCK CONTROL, SIR)LIGHTING SYSTEMS CONNECTOR END VIEWSTAIL/STOP AND TURN SIGNAL LAMP CONNECTOR END VIEW - LOWER RIGHT
2008 Chevrolet Chevy Express G2500, Van Cargo, 6.6 6

Tail/Stop and Turn Signal Lamp Connector End View - Lower Right

2008 Chevrolet Chevy Express G2500, Van Cargo, 6.6 6SECTION Tail/Stop and Turn Signal Lamp Connector End View - Lower Right
WARNING: This page is about a different car, the 2007 GMC Sierra and 2007 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Tail/Stop and Turn Signal Lamp - Lower Right Connector End Views
GM1914602Courtesy of GENERAL MOTORS CORP.
Tail/Stop and Turn Signal Lamp - Lower Right Connector Parts Information

Connector Part Information 
  • OEM: 1014006
  • Service: See Catalog
  • Description: 3-Way F W3 Socket Sealed (BK)
Terminal Part Information 
  • Terminal/Tray: See Terminal Repair Kit
  • Core/Insulation Crimp: See Terminal Repair Kit
  • Release Tool/Test Probe: See Terminal Repair Kit
Tail/Stop and Turn Signal Lamp - Lower Right Connector Terminal Identification

Pin Wire Color Circuit No. Function
MJR 0.8 D-GN 19 Right Rear Turn Signal Lamp Supply Voltage
MNR 0.8 BN 2609 Right Rear Park Lamps Supply Voltage
0.8 BN 2609 Right Rear Park Lamps Supply Voltage (Z88)
GRD 0.8 BK 2150 Ground
0.8 BK 2150 Ground (Z88)
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.