SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2008CHEVY EXPRESS G2500, VAN CARGO, 6.6 6REPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 2675 (OEM CONNECTOR END VIEWS - SIERRA & SILVERADO - LIGHTING SYSTEMS, MIRROR, OBJECT DETECTION, POWER AND GROUNDING, POWER OUTLET, POWER SEAT, POWER TAKE-OFF (PTO), REMOTE FUNCTION, SEAT BELT, SECONDARY/CONFIGURABLE CONTROL, SHIFT LOCK CONTROL, SIR)LIGHTING SYSTEMS CONNECTOR END VIEWSCOURTESY/READING LAMPS CONNECTOR END VIEW - REAR (EXTENDED CAB/CREW CAB)
2008 Chevrolet Chevy Express G2500, Van Cargo, 6.6 6

Courtesy/Reading Lamps Connector End View - Rear (Extended Cab/Crew Cab)

2008 Chevrolet Chevy Express G2500, Van Cargo, 6.6 6SECTION Courtesy/Reading Lamps Connector End View - Rear (Extended Cab/Crew Cab)
WARNING: This page is about a different car, the 2007 GMC Sierra and 2007 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Courtesy/Reading Lamps - Rear (Extended Cab/Crew Cab) Connector End Views
GM333035Courtesy of GENERAL MOTORS CORP.
Courtesy/Reading Lamps - Rear (Extended Cab/Crew Cab) Connector Parts Information

Connector Part Information 
  • OEM: 12047781
  • Service: 12101864
  • Description: 3-Way F Metri-Pack 150 Series (BK)
Terminal Part Information 
  • Terminal/Tray: 12064971/5
  • Core/Insulation Crimp: E/C
  • Release Tool/Test Probe: 12094429/J-35616-2A (GY)
Courtesy/Reading Lamps - Rear (Extended Cab/Crew Cab) Connector Terminal Identification

Pin Wire Color Circuit No. Function
A 0.5 GY 157 Courtesy Lamp Control
B 0.5 BK 1050 Ground
C 0.35 OG 6815 Inadvertent Power Control
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.