SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2008CHEVY EXPRESS G2500, VAN CARGO, 6.6 6REPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 2651 (WIRING SYSTEMS AND POWER MANAGEMENT - COMPONENT CONNECTOR END VIEWS - ELECTRONIC COMPASS MODULE TO MEMORY SEAT MODULE (X4))COMPONENT CONNECTOR END VIEWSINFLATABLE RESTRAINT PASSENGER PRESENCE SYSTEM (PPS) MODULE (WITHOUT HP2 OR Z75 WITH HP2)
2008 Chevrolet Chevy Express G2500, Van Cargo, 6.6 6

Inflatable Restraint Passenger Presence System (PPS) Module (without HP2 or Z75 with HP2)

2008 Chevrolet Chevy Express G2500, Van Cargo, 6.6 6SECTION Inflatable Restraint Passenger Presence System (PPS) Module (without HP2 or Z75 with HP2)
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 GMC Yukon XL, 2012 GMC Yukon, 2012 Chevrolet Tahoe, 2012 Chevrolet Suburban, and 2012 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
GM1974974Courtesy of
Connector Part Information
  • Harness Type: Passenger Seat
  • OEM Connector: 88988771
  • Service Connector: 13577043
  • Description: 6-Way F M64 Series, Sealed (BK)
Terminal Part Information
  • Terminated Lead: Service by Harness - See Part Catalog
  • Release Tool: Not Available
  • Diagnostic Test Probe: J-35616-64B (L-BU)
  • Terminal/Tray: Not Available
  • Core/Insulation Crimp: Not Available
Inflatable Restraint Passenger Presence System (PPS) Module (without HP2 or Z75 with HP2)

Pin Wire Circuit Function
1 0.5 RD/WH 4440 Battery Positive Voltage
2 0.35 D-GN 5060 Low Speed GMLAN Serial Data
3 - - Not Used
4 0.5 BK/WH 2751 Low Reference
5 0.35 D-GN 5612 Passenger Seat Belt Tension Sensor Voltage Reference
6 0.35 D-GN/WH 5611 Passenger Seat Belt Tension Sensor Signal
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.