Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2008CHEVY EXPRESS G2500, VAN CARGO, 6.6 6REPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 2432 (POWER SEAT SYSTEM)DESCRIPTION AND OPERATIONMEMORY SEATS DESCRIPTION AND OPERATIONNOTES
2008 Chevrolet Chevy Express G2500, Van Cargo, 6.6 6
Memory Seats Description and Operation: Notes
2008 Chevrolet Chevy Express G2500, Van Cargo, 6.6 6SECTION Notes
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
The memory seat system consists of the following components:
- Memory seat module
- Driver door switch
- Driver seat adjuster switch
- Driver seat lumbar switch
- Memory seat switch or Memory/heated seat switch
- Driver door lock/window switch
- Driver seat horizontal motor
- Driver seat front vertical motor
- Driver seat rear vertical motor
- Driver seat recline motor
- Driver seat lumbar horizontal motor
- Driver seat lumbar vertical motor
- Driver seat horizontal motor position sensor
- Driver seat front vertical motor position sensor
- Driver seat rear vertical motor position sensor
- Driver seat recline motor position sensor
- Driver seat lumbar horizontal motor position sensor
- Driver seat lumbar vertical motor positional sensor
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.