Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2008CHEVY EXPRESS G2500, VAN CARGO, 6.6 6REPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 2097 (REAR DRIVE AXLE)SPECIFICATIONSFASTENER TIGHTENING SPECIFICATIONS
2008 Chevrolet Chevy Express G2500, Van Cargo, 6.6 6
Fastener Tightening Specifications
2008 Chevrolet Chevy Express G2500, Van Cargo, 6.6 6SECTION Fastener Tightening Specifications
WARNING: This page is about a different car, the 2010 GMC Sierra, 2010 GMC Cab & Chassis Sierra, 2010 Chevrolet Silverado, and 2010 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Axle Flange Bolt (10.5 Inch Axle) | 156 N.m | 115 lb ft |
| Axle Flange Bolt (11.5 Inch Axle) | 185 N.m | 136 lb ft |
| Bearing Cap Bolt (8.6 Inch Axle) | 75 N.m | 55 lb ft |
| Bearing Cap Bolt (9.5/9.5 Inch LD Axles) | 85 N.m | 63 lb ft |
| Bearing Cap Bolt (10.5 Inch Axle) | 185 N.m | 136 lb ft |
| Bearing Cap Bolt (11.5 Inch Axle) | 207 N.m | 153 lb ft |
| Brake Backing Plate Bolt | 135 N.m | 100 lb ft |
| Brake Hose Bracket Bolt | 22 N.m | 16 lb ft |
| Brake Pipe Bracket to Rear Axle Bolt | 22 N.m | 16 lb ft |
| Brake Pipe Bracket to Rear Axle Nut | 13 N.m | 115 lb in |
| Brake Pipe Junction Block Bolt | 22 N.m | 16 lb ft |
| Differential Bearing Adjuster Nut Lock Bolt (9.5/9.5 Inch LD Axles) | 26 N.m | 19 lb ft |
| Differential Bearing Adjuster Nut Lock Bolt (10.5 Inch Axle) | 27 N.m | 20 lb ft |
| Differential Bearing Adjuster Nut Lock Bolt (11.5 Inch Axle) | 27 N.m | 20 lb ft |
| Fill Plug | 33 N.m | 24 lb ft |
| Flex Hose Bracket Bolt | 12 N.m | 106 lb in |
| Pinion Gear Bearing Retainer Bolt (10.5 Inch Axle) | 88 N.m | 65 lb ft |
| Pinion Shaft Lock Bolt (8.6 Inch Axle) | 36 N.m | 27 lb ft |
| Pinion Shaft Lock Bolt (9.5/9.5 Inch LD Axles) | 50 N.m | 37 lb ft |
| Propeller Shaft Yoke Retainer Bolt | 25 N.m | 18 lb ft |
| Rear Axle Housing Cover Bolt | 40 N.m | 30 lb ft |
| Ring Gear Bolt (8.6 Inch Axle) | 120 N.m | 89 lb ft |
| Ring Gear Bolt (9.5/9.5 Inch LD Axle) | 140 N.m | 103 lb ft |
| Ring Gear Bolt (10.5 Inch Axle) | 165 N.m | 122 lb ft |
| Ring Gear Bolt ( 11.5 Inch Axle) | 237 N.m | 175 lb ft |
| Shock Absorber Nut - Lower | 95 N.m | 70 lb ft |
| Stabilizer Shaft Link Bolt | 95 N.m | 70 lb ft |
| Stabilizer Shaft U-bolt Nut | 32 N.m | 24 lb ft |
| U-bolt Nut | 72 N.m | 53 lb ft |
| U-bolt Nut (25/35 Series) | 150 N.m | 110 lb ft |
| Wheel Hub Nut (10.5/11.5 Inch Axles) | 70 N.m | 52 lb ft |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.