Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2008CHEVY EXPRESS G2500, VAN CARGO, 6.6 6REPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 2092 (ANTILOCK BRAKE SYSTEM - HYBRID (HP2) WITH TRACTION CONTROL SYSTEM & STABILITY CONTROL SYSTEM)SPECIFICATIONSFASTENER TIGHTENING SPECIFICATIONS
2008 Chevrolet Chevy Express G2500, Van Cargo, 6.6 6
Fastener Tightening Specifications
2008 Chevrolet Chevy Express G2500, Van Cargo, 6.6 6SECTION Fastener Tightening Specifications
WARNING: This page is about a different car, the 2010 GMC Sierra and 2010 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Antilock Brake System (ABS) Module Splash Shield Bolt | 20 N.m | 15 lb ft |
| Brake Pressure Modulator Valve (BPMV) Bolt | 9 N.m | 80 lb in |
| Brake Modulator Manual Pressure Relief Valve | 40 N.m | 30 lb ft |
| Brake Pipe Fitting | 18 N.m | 13 lb ft |
| Brake Pipe Manifold Bolt | 11 N.m | 97 lb in |
| BPMV Bracket Bolt | 22 N.m | 16 lb ft |
| Electronic Brake Control Module (EBCM) Bolt | 3 N.m | 27 lb in |
| Master Cylinder Hose Fitting - Return and Supply | 8 N.m | 71 lb in |
| Wheel Speed Sensor Bolt - Front | 13 N.m | 115 lb in |
| Wheel Speed Sensor Bolt - Rear | 9 N.m | 80 lb in |
| Yaw Rate Sensor with Vehicle Lateral and Longitudinal Accelerometer Nut | 7 N.m | 62 lb in |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.